Intake Manifold with Attachments, Assembly Overview

Intake Manifold with Attachments, Assembly Overview






1 23 Nm

2 Intake manifold

• 1-part

• Intake Manifold with Fuel Rail, Removing and Installing => [ Intake Manifold with Fuel Rail, Removing and Installing ] Intake Manifold with Fuel Rail, Removing and Installing

3 Manifold Absolute Pressure (MAP) Sensor (G71)

• With manifold absolute pressure sensor (G71)

4 2.5 Nm

5 Connecting piece

• For the hose to the intake hose => [ (Item 7) To the intake manifold ] Service and Repair

6 Connecting piece

• For the hose to the brake booster

7 Rubber bushing

• For the mounting on the warm air collector plate

8 EVAP canister purge regulator valve 1 (N80)

9 Throttle valve control module (J338)

• With EPC throttle drive (G186) , EPC throttle drive angle sensor 1 (G187) and EPC throttle drive angle sensor 2 (G188)

• When replacing, erase the adaptation values and adapt the engine control module to the throttle valve control module => vehicle diagnosis, testing and information system "Guided Functions".

10 Seal

• Replace if damaged

11 Connections for coolant hoses

• => [ Coolant Hose Connection Diagram ] [1][2]Cooling System

12 9 Nm

13 Gasket

• Replace

14 Fuel rail

• Assembly overview => [ Fuel Rail with Fuel Injectors, Assembly Overview ] Fuel Rail with Fuel Injectors, Assembly Overview

15 23 Nm

16 Connecting piece

• For the intake hose => [ (Item 5) To the intake manifold ] Service and Repair