Subframe Mount Adjustment, Checking

Subframe Mount Adjustment, Checking

Perform the following:

• There must be at least 10 to 13 mm - a - between engine support and right longitudinal member.






• Casting edge on engine support - 2 - must stand parallel to bracket - 1 -.

• Dimension - x - must be the same in the front and in the rear.

• Distance - a - can be checked e.g. using a suitable round stock.

Only if there is noise (the engine or transmission hitting the longitudinal member when driving around curves) and dimension - a - is not within 10 to 13 mm:

- Adjust the subframe mount => [ Subframe Mount, Adjusting ] Subframe Mount, Adjusting.