Diagram 32/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver seat lumbar support adjustment switch, Driver seat lumbar support curvature adjustment motor, Driver seat lumbar support height adjustment motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E176 - Driver seat lumbar support adjustment switch Driver Seat Lumbar Support Adjustment Switch -E176-

T4bg - 4-pin connector

T4bh - 4-pin connector

T4n - 4-pin connector, in the driver seat backrest

T6ah - 6-pin connector

T10c - 10-pin connector, under the driver seat Component Locations

V125 - Driver seat lumbar support curvature adjustment motor Driver Seat Lumbar Support Curvature Adjustment Motor -V125-

V129 - Driver seat lumbar support height adjustment motor Driver Seat Lumbar Support Height Adjustment Motor -V129-

(44) - Ground connection on A-pillar, lower left Locations

(96) - Ground connection 1 (in heated seats wiring harness)

* - Only for vehicles with an auxiliary heater

*2 - Only for vehicles without heated seats

Previous Diagram 32/2 (Tracks 1-14)