Diagram 13/19 (Tracks 239-252)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fuel pump relay 2, Engine control module, Wastegate bypass regulator valve, Positive crankcase ventilation heating element, EGR cooler switch-over valve, Fuel pump 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J49 - Fuel pump relay 2 Overview Of Relay Carrier

J623 - Engine control module Overview Of Control Modules

N75 - Wastegate bypass regulator valve 2.0L BPY, CCTA and CBFA Overview Diagrams

N79 - Positive crankcase ventilation heating element 2.0L CBEA, CJAA, TDI from 2008 Overview [1][2]Diagrams

N345 - EGR cooler switch-over valve Locations

T2ed - Double connector

T2fb - Double connector

T2fc - Double connector

T2fl - Double connector

T5ac - 5-pin connector

T10g - 10-pin connector Overview Of Connector Stations and Connectors

T14 - 14-pin connector, near the battery Overview Of Connector Stations and Connectors

T60 - 60-pin connector

T94 - 94-pin connector

V277 - Fuel pump 2 Locations

(12) - Ground connection in engine compartment, left Locations

(D102) - Connection 2 (in engine compartment wiring harness)

* - Depending on equipment

*2 - Only for vehicles with crankcase ventilation heater

*3 - Running change

*4 - Omitted as a running change

Previous Diagram 13/18 (Tracks 225-238)

Next Diagram 13/20 (Tracks 253-266)