Central Locking Component Overview

Central Locking Component Overview






1 Connector station

• Installed location: left A-pillar

• Loosen the boot on the pillar to disconnect the connector

2 Front passenger door control module (J387)

• Integrated in the front passenger window regulator motor (V148)

• Removing and Installing, refer to => [ Window Regulator Motor ] Window Regulator Motor

3 Front passenger door lock

• The door lock is attached to the door inner panel.

• The power central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

4 Connector station

• Installed location: right B-pillar

• Loosen the boot on the pillar to disconnect the connector

5 Right rear door control module (J389)

• Integrated inside the right rear window regulator motor (V27)

• Removing and Installing, refer to => [ Window Regulator Motor ] Window Regulator Motor

6 Right rear door lock

• The door lock is attached to the door inner panel.

• The power central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

7 Fuel tank lid unlock motor (V155)

• Removing and Installing, refer to => [ Fuel Filler Door Unlock Motor ] Fuel Filler Door Unlock Motor

8 Rear lid lock

• Installed location: on the rear lid

• Removing and Installing, refer to => [ Rear Lid Latch ] Rear Lid Latch

9 Release button in rear lid handle (E234)

• Installed location: on the rear lid

• Removing and Installing, refer to => [ Release Button in Rear Lid Handle ] Release Button in Rear Lid Handle

10 Left rear door lock

• The door lock is attached to the door inner panel.

• The power central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

11 Left rear door control module (J388)

• Integrated inside the left rear window regulator motor (V26)

• Removing and Installing, refer to => [ Window Regulator Motor ] Window Regulator Motor

12 Driver side door lock

• The door lock is attached to the door inner panel.

• The power central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

13 Connector station

• Installed location: left B-pillar

• Loosen the boot on the pillar to disconnect the connector

14 Driver door control module (J386)

• Integrated inside the driver window regulator motor (V147)

• Removing and Installing, refer to => [ Window Regulator Motor ] Window Regulator Motor

15 Driver side window regulator switch module

• Installed location: inside the driver door trim panel

16 Connector station

• Installed location: right A-pillar

• Loosen the boot on the pillar to disconnect the connector

17 Vehicle electrical system control module (J519)

• Installed location: under the instrument panel on the driver side; clipped to the relay panel

18 Alarm horn (H12)

• Installed location: in the plenum chamber

19 Engine hood contact switch (F266)

• Installed location: on the latch