ABS Mark 60 EC (ABS/EDL/TCS/ESP) Overview

Component Locations: Anti-Lock Brake Systems

ABS Mark 60 EC (ABS/EDL/TCS/ESP) Overview







1 ABS control module -J104-
• Location: on the ABS hydraulic unit -N55- on right in engine compartment
The following components are integrated into the ABS control unit
-J104-:
• Transverse acceleration sensor -G200-

• Rotation rate sensor -G202-

• Longitudinal acceleration sensor -G251-
(depending on equipment fitted)

2 ABS hydraulic unit -N55-
The ABS hydraulic unit -N55- consists of the following components:
• ABS hydraulic pump -V64-

• Brake pressure sensor 1 -G201-

3 ABS indicator lamp -K47-
• Location: in dash panel insert
4 ASR/ESP indicator lamp -K155-
• Location: in dash panel insert
5 Brake system indicator lamp -K118-
• Location: in dash panel insert
6 Brake lamp switch -F- => [ Brake Light Switch ] See Image Below.
• Includes Brake pedal switch -F47-
• Location: on brake master cylinder
7 Steering angle sensor -G85- => [ Steering Angle Sensor ] See Image Below.
8 Diagnostic connection
9 Rear wheel bearing unit
10 Rear speed sensor => [ Rear Speed Sensor ] See Image Below.
11 Front wheel bearing unit
12 Front speed sensor => [ Front Wheel Speed Sensor ] See Image Below.

Brake Light Switch






3 - Brake lamp switch -F- / Brake pedal switch -F47- located on the master cylinder

Rear Speed Sensor






1 - Right rear ABS wheel speed sensor -G44- / Left rear ABS wheel speed sensor -G46-

Front Wheel Speed Sensor






1 - Right front ABS wheel speed sensor -G45- / Left front ABS wheel speed sensor -G47-

Steering Angle Sensor






1 - Steering angle sensor -G85-