Diagram 42/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Multifunction indicator, Instrument cluster control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J119 - Multifunction indicator

J285 - Instrument cluster control module Overview Of Control Modules

J533 - Data bus on board diagnostic interface Overview Of Control Modules

T16 - 16-pin connector Overview Of Connector Stations and Connectors

T20 - 20-pin connector

T32 - 32-pin connector

(A76) - KS-diagnostic lead connection (in instrument panel wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

* - only for vehicles with High equipment (AW1)

*2 - Diagnostic connector

*3 - only for vehicles with Low equipment (AW0)

Previous Diagram 42/6 (Tracks 57-70)