Windshield Wiper System

Windshield Wiper System

The Wiper Motor Control Module (J400) is integrated with the Windshield Wiper Motor (V).

To remove wiper blades, wiper arms must be driven into "service/winter position". The "service/winter position" is activated by operating the windshield wiper lever in the "one-touch wiping" position within 10 seconds after switching off the ignition.






DTC Recognition and Display

The Vehicle Electrical System Control Module (J519) is equipped with OBD.

Use the "Guided Fault Finding" function on the (Vehicle diagnostic tester) for fault finding.