Rear Wheel Housing Liner

Rear Wheel Housing Liner

Removing






- Remove the wheel.

- Remove bolts - 2 - (quantity: 10).

- Remove the wheel housing liner - 1 - from the fender.

Installing






Perform the following:

• Check the expanding nuts - 3 - damage and replace if necessary.


• Check the gas-tight expanding nuts - 4 - for damage and replace if necessary.

• The expanding nuts seal off the passenger compartment from exhaust gas and must always be replaced if they are damaged.

- Install the wheel housing liner - 1 - into the fender.

- Tighten the bolts - 2 -.

Bolt - 2 - tightening specification: 2 Nm

- Install the wheel.