ABS Mark 60 EC (ABS/EDL/ASR/ESP)

ABS Control Module and Hydraulic Unit Overview






1 ABS Hydraulic Unit (N55)

• Removing and installing, refer to => [ ABS Control Module (J104) and ABS Hydraulic Unit (N55) ] ABS Control Module (J104) and ABS Hydraulic Unit (N55).

2 ABS Control Module (J104)

• Removing and installing, refer to => [ ABS Control Module (J104) and ABS Hydraulic Unit (N55) ] ABS Control Module (J104) and ABS Hydraulic Unit (N55).

3 Bolt

• 2 Nm +/- 0.8 Nm

• Quantity: 4

• Always replace if removed.

4 Brake Line

• 14 Nm

• To left front brake caliper

• Identification: diameter 5.25 mm and tube fitting with M10 x 1 thread

5 Brake Line

• 14 Nm

• ABS hydraulic unit for the master brake cylinder/primary piston circuit.

• Identification: diameter 6.5 mm and tube fitting with M12 x 1 thread

6 Brake Line

• 14 Nm

• To right front brake caliper.

• Identification: diameter 5.25 mm and tube fitting with M12 x 1 thread

7 Brake Line

• 14 Nm

• ABS hydraulic unit for the master brake cylinder/secondary piston circuit.

• Identification: diameter 6.5 mm and tube fitting with M12 x 1 thread

8 Brake Line

• 14 Nm

• Master brake cylinder/primary piston circuit for the ABS hydraulic unit.

• Identification: diameter 6.5 mm and tube fitting with M12 x 1 thread

9 Brake Line

• 14 Nm

• Master brake cylinder/secondary piston circuit for the ABS hydraulic unit

• Identification: diameter 6.5 mm and tube fitting with M12 x 1 thread

10 Brake Booster

• Refer to=> [ Brake Booster and Master Brake Cylinder Overview ] Brake Booster and Master Brake Cylinder Overview.

• Removing and installing; refer to=> [ Brake Booster ] Brake Booster.

11 Brake Line

• 14 Nm

• To left rear brake caliper/brake cylinder.

• Identification: diameter 5.25 mm and tube fitting with M12 x 1 thread

12 Brake Line

• 14 Nm

• To the right rear brake caliper/brake cylinder.

• Identification: diameter 5.25 mm and tube fitting with M10 x 1 thread

13 Hex Bolt

• 8 Nm

14 Rubber Insulation

15 Bracket

• After installing, make sure it fits properly.

16 Bolt

• 8 Nm

• Quantity: 3

17 Nut

• 8 Nm

• Quantity: 2

18 Bracket

19 Rubber Insulation

• Do not press the rubber bushings out of the bracket when installing the mount.