Headlamp Washer System

Headlamp Washer System

• Additional information:

•

• Refer to the Owner's Manual.

General Information

The headlamps will be washed once for every five times the windshield washer system is activated if the windshield wiper lever is held pressed in toward the steering wheel for at least 1.5 seconds. The headlamps must be on.

After assembly work or when first operating headlamp cleaning system, it must be ventilated to ensure proper function of lift cylinders and spray nozzles. Refer to=> [ Headlamp Washer System, Bleeding ] Procedures.

DTC Recognition and Display

The Vehicle Electrical System Control Module (J519) is equipped with OBD.

Use the "Guided Fault Finding" on the Vehicle diagnostic tester for fault finding.