Front Fender Assembly Overview

Front Fender Assembly Overview

• The illustration shows a left fender. The right fender is identical.






1 Fender

• Removing and installing, refer to => [ Front Fender ] Front Fender

2 Bolt

• Quantity: 9

• Tightening specification: 6 Nm

3 Foam piece

• Inserted between the fender and the wheel housing longitudinal member. Refer to => [ Fender Insulation and Foam Pieces, Fillet Plate and A-Pillar ] Fender Insulation and Foam Pieces, Fillet Plate and A-Pillar.

4 Fender end piece

• Removing and Installing, refer to => [ Fender End Piece ] Fender End Piece

5 Fillet plate insulation

• Installed in front of the fillet plate on the fender, refer to => [ Fender Insulation and Foam Pieces, Fillet Plate and A-Pillar ] Fender Insulation and Foam Pieces, Fillet Plate and A-Pillar

6 Fender brace

• Removing and Installing, refer to => [ Fender Brace ] Fender Brace

7 Bolt

• Quantity: 2

• Tightening specification: 6 Nm

8 Molded foam part

• On the upper wheel housing longitudinal member

9 Nut

• Tightening specification: 6 Nm