Motor Support

Motor Support

Removing

- Remove the assembly frame from the vehicle. Refer to => [ Assembly Frame ] Assembly Frame.

- Remove sunroof motor. Refer to => [ Sunroof Motor ] Sunroof Motor.






- Remove bolts - arrows -.

- Remove the cable covers - 1 and 2 -.

The front motor plate - 3 - remains on the front panel - 4 -.






- Remove the cable ends - 1 - from the motor support - 2 -.

- Pry the motor support - 2 - out using a suitable screwdriver - 4 - from the front part - 3 -.

Installation

To install, perform the steps used for removal in reverse order.

Tightening Specifications

Cable cover bolt 2 Nm

• Do not lubricate the sun shade slide cables and motor support.

- Install the sunroof motor. Refer to => [ Sunroof Motor ] Sunroof Motor.

- Install the assembly frame. Refer to => [ Assembly Frame ] Assembly Frame.

- After completing all the work, perform a sun shade motor adaptation. Refer to => [ Adaptation Panorama Sunroof ] Adaptation Panorama Sunroof.