Radiator Cooling Fan: Service and Repair

Fan Shroud and Fans

Removing

- Remove the upper bolts - upper arrows - at the top of the fan shroud.






- Remove the noise insulation.

- Remove the hot side charge air pipe hose. Loosen the hose clamp - 2 - and lift the circlip - 1 -.






- Disconnect the connector - 1 -.






- Remove the bottom bolts - lower arrows -.

- Remove the fan shroud and the fans.

- Disconnect the connector - 1 - and, if equipped, - 2 - and free up the wires.






- Remove the nuts - arrows - and remove the fans.

Installing

Installation is performed in the reverse order.