Diagram 149/29 (Tracks 379-392)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Connection (87a) (in engine wiring harness), Entry lamp connection (in driver door wiring harness)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated oxygen sensor Locations Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

G130 - Oxygen sensor after three way catalytic converter Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

J519 - Vehicle electrical system control module Locations

SB21 - Fuse 21 (on fuse panel B) Locations

T1gie - Single connector

T1gif - Single connector

T6af - 6-pin connector

T6w - 6-pin connector

T40 - 40-pin connector

T52b - 52-pin connector

W31 - Left front entry lamp

W32 - Right front entry lamp

Z19 - Oxygen sensor heater Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

(E30) - Connection (87a) (in engine wiring harness)

(R56) - Entry lamp connection (in driver door wiring harness)

Previous Diagram 149/28 (Tracks 365-378)

Next Diagram 149/30 (Tracks 393-406)