Crankshaft Main Bearing

Axial play:
New: 0.07 to 0.17 mm
Wear limit: 0.37 mm

Check the radial clearance using Plastigage(R):
New: 0.03 to 00.08 mm
Wear limit: 0.17 mm
Do not rotate the crankshaft when measuring the radial play.

Bearing Cap

Bolt
65 Nm + an additional 90° (1/4) turn.
Always replace.
Tighten to 65 Nm to measure the radial play, do not tighten further.






Crankshaft Dimensions