Timing Cover

Toothed Belt Overview






1 Toothed Belt

24 Upper Toothed Belt Guard

25 Lower Toothed Belt Guard

26 Center Toothed Belt Guard

27 Bolt

• 10 Nm

• Always replace.


Installing the Upper Toothed Belt Guard





- Make sure the upper toothed belt guard section is clipped to the cylinder head cover correctly.

• The camshaft sprocket is not shown in the illustration.

- Press the upper toothed belt guard in the area with the clips - arrows - against the cylinder head cover until the clips engage with each other. Use a screwdriver to press the guard if necessary.

- Check the clearance between the hub and the upper toothed belt guard.