Gas-Filled Strut, Releasing Gas

Gas-Filled Strut, Releasing Gas

- Clamp area x of the gas strut in the vise, area - x - = 50 mm.






Clamping the gas-filled strut must only be done in this area - x -, otherwise there is a risk of an accident.

- Using saw, cut into cylindrical part of strut at point within first third of cylinder's length (measured from cover edge at piston rod end of cylinder).

• Wear protective eyewear when sawing.

• Cover the area of the saw cut with a clean rag.

• Dispose of oil and cloth via existing disposal channels.