Door Decorative Strip

Door Decorative Strip

• The illustration shows the left side. The right side is identical.

• It is not possible to remove the body side moldings without damaging them.






Removing

- Warm the body side moldings - 1 - or - 2 - before installing with hot air blower (V.A.G 1416).

- Lift one corner using trim removal wedge (3409) and then pull the body side moldings - 1 - or - 2 - forcefully off the front door - 3 - or rear door - 4 -.

Installation

Front door body side molding dimensions, refer to => [ Front Door Body Side Molding Dimensions ] Front Door Body Side Molding Dimensions

Rear door body side molding dimensions, refer to => [ Rear Door Body Side Molding Dimensions ] Rear Door Body Side Molding Dimensions

Follow the installation instructions => [ Front and Rear Door Side Molding Installation Instructions ] Front and Rear Door Side Molding Installation Instructions.

- Press the body side moldings - 1 - or - 2 - evenly onto the adhesive surface.