Sunroof Adjustment Regulator (E139)

Sunroof Adjustment Regulator (E139)

• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( trim removal wedge (3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Remove the front interior lamp. Refer to => [ Front Interior Lamp (W1), With Sunroof ] Front Interior Lamp (W1), With Sunroof.

- Open the tabs - arrows - and remove the sunroof adjustment regulator from the trim.






Installing

Installation is performed in the reverse order of removal. Note the following:

- Line up the tab - 2 - on the sunroof adjustment regulator with the groove in the trim.