Front Turn Signal Bulb

Front Turn Signal Bulb

• It is not necessary to remove the headlamp when replacing the headlamp bulb.

• The illustration of the caps shows the right headlamp glass.

• The illustrations show how to replace the left front turn signal bulb (M5).

• Replacing a bulb in the right headlamp is identical.

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the cap - 3 -.






- Turn the bulb socket - 1 - in - direction of arrow - and pull the left front turn signal bulb (M5) out of the headlamp.






- Remove the left front turn signal bulb (M5) - 1 - from the bulb socket - 2 - in - direction of arrow -






Bulbs: 12 V/21 W

Installing

• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

• During installation, ensure proper seating of the cap. It is destroyed by entry of water into headlamp.

Install in reverse order of removal. Note the following:

- Check headlamp for functions.