Fuel Supply System Safety Precautions

Fuel Supply System Safety Precautions

Note the following whenever working inside the engine compartment due to limited space:

• Route all lines and cables in their original locations.

• Ensure sufficient clearance to all moving or hot components.

Remember, the fuel pump will turn on when a door is opened, if the battery is connected. Fuel may leak out when the system is open.

Always observe the following when removing and installing the sender for fuel gauge or the fuel pump from full or partially filled fuel tanks.

• Before starting work, place the extracting hose on an exhaust extractor that is switched on near the fuel tank assembly opening. This will extract the fuel vapors. If no exhaust extraction system is available, a radial fan (as long as motor is not in air flow) with a displacement greater than 15 m3/h can be used.

• Prevent fuel from contacting skin! Wear fuel-resistant gloves!

Fuel lines are under pressure.

Danger of personal injury to eyes and skin.

Wear safety glasses and protective clothing in order to avoid injury and contact with the skin. Wrap a cloth around the connection before removing a fuel hose. Open the connection carefully and release the pressure.

Fuel hoses inside the engine compartment, refer to => [ Fuel Hoses Inside Engine Compartment ] Description and Operation.