Fuel Gauge Sender: Service and Repair

Fuel Level Sensor (G)

Removing

- Remove the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] Fuel Delivery Unit.

- Squeeze the tabs - arrows - and remove the fuel level sensor upward.






- Write down the colors of the wires for installing later.

- Disconnect the connectors - 1 through 3 -.






- Bend back the hooks on the connectors.

Installing






Install in reverse order of removal. When doing this note the following:

- Connect the connectors - 1 through 3 -.

• Pay attention to the color coding.

- Pull on the connectors to make sure they are secure.

- Install the fuel level sensor into the guide on the fuel delivery unit and push down until it engages.

- Clip the wires into their positions and secure them to the cup in the slots.

- Install the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] Fuel Delivery Unit.