Engine Assembly - Fastener Tightening Specifications

Fastener Tightening Specifications






• 1 Tightening specification for a M12 collar bolt: 75 Nm

Engine Mount Bolt Tightening Specification





Support the engine in its installed position when installing and removing.

A = 40 Nm + an additional 90° (1/4) turn 1

B = 60 Nm + an additional 90° (1/4) turn 1

C = 20 Nm + an additional 90° (1/4) turn 1

Transmission Mount Bolt Tightening Specification





1 = 40 Nm + an additional 90° (1/4) turn 1

2 = 60 Nm + an additional 90° (1/4) turn 1

Pendulum Support Bolt Tightening Specification





A = 50 Nm + an additional 90° (1/4) turn 1

B = 50 Nm + an additional 90° (1/4) turn 1

C = 100 Nm + an additional 90° (1/4) turn 1

• 1 Always replace

Manual Transmission 02Q to Engine, Bolt Tightening Sequence and Specification











Direct Shift Gearbox (DSG(R)) to Engine, Bolt Tightening Sequence and Specification