Diagram 8/5 (Tracks 43-56)
IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions
Selector lever sensor system control module, Selector lever scale illumination bulb, Shift lock solenoid, Transmission range display
ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink
E313 - Selector lever Tiptronic Switch -F189- /Selector Lever -E313- and Selector Lever Park Position Lock Switch -F319-
F319 - Selector lever park position lock switch Locations Locations Tiptronic Switch -F189- /Selector Lever -E313- and Selector Lever Park Position Lock Switch -F319-
J527 - Steering column electronics control module Locations Access/Start Authorization System Overview Steering Column Electronics Control Module -J527-
J587 - Selector lever sensor system control module Locations
J764 - Electronic steering column lock control module Locations Access/Start Authorization System Overview Electronic Steering Column Lock Control Module -J764-
L101 - Selector lever scale illumination bulb
N110 - Shift lock solenoid Locations Locations
SC12 - Fuse 12 (on fuse panel C) Overview of fuse holder
T2p - Double connector
T10s - 10-pin connector
T10v - 10-pin connector
T16l - 16-pin connector Locations
T16v - 16-pin connector Locations
Y6 - Transmission range display
(43) - Ground connection on A-pillar, lower right Locations
(366) - Ground connection 1 (in main wiring harness)
(388) - Ground connection 23 (in main wiring harness)
(B150) - Positive connection 2 (30a) (in interior wiring harness)
(B340) - Connection 1 (58d) (in main wiring harness)
(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)
(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)
* - only for vehicles with access/start authorization system
Previous Diagram 8/4 (Tracks 29-42)
Next Diagram 8/6 (Tracks 57-70)