Diagram 8/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument cluster control module, Data bus on board diagnostic interface, Diagnostic connection





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J119 - Multifunction indicator

J285 - Instrument cluster control module Locations

J533 - Data bus on board diagnostic interface Locations

K - Instrument cluster Locations

T16 - 16-pin connector

T20 - 20-pin connector Locations

T32 - 32-pin connector Locations

U31 - Diagnostic connection

(A204) - Instrument cluster CAN bus high connection (in instrument panel wiring harness)

(A205) - Instrument cluster CAN bus low connection (in instrument panel wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B713) - Diagnostic CAN bus high connection 1 (in main wiring harness)

(B714) - Diagnostic CAN bus low connection 1 (in main wiring harness)

Previous Diagram 8/5 (Tracks 43-56)