Clutch Overview, LuK

Clutch Overview, LuK






1 Dual Mass Flywheel

• Make sure it fits securely on the centering pins.

• Keep the clutch lining contact surface free of grooves, oil and grease.

2 Clutch Plate

• Allocation. Refer to the Parts Catalog.

• Removing and installing, refer to => [ Clutch, LuK ] Clutch, LuK.

• Only replace together with the SAC pressure plate.

• Installed position, refer to => [ Clutch Plate Installed Position ] Clutch, LuK.

3 SAC Pressure Plate

• SAC = "Self Adjusting Clutch"

• Only replace together with the clutch disc.

• Allocation, refer to the Parts Catalog.

• Removing and installing, refer to => [ Clutch, LuK ] Clutch, LuK.

• Checking the ends of the diaphragm spring. Refer to => [ Checking the ends of the diaphragm spring. ] Clutch, LuK.

• Checking the spring and rivet connections. Refer to => [ Checking the spring and rivet connections. ] Clutch, LuK.

• Release bearing with an additional plastic washer. Refer to => [ Release Bearing with an Additional Plastic Washer: ] Clutch Release Mechanism, adapted pressure plate, refer to => [ Only for release bearings with an additional plastic washer: Pressure plate diaphragm spring () with a slightly lower installed height. ] Clutch Release Mechanism.

4 Bolt

• M6 - 13 Nm

• M7 - 20 Nm

• Quantity: 6

• Loosen and tighten in small steps and in a diagonal sequence.