Windshield and Rear Window Washer System

Windshield and Rear Window Washer System

The following hose connection types are used for connecting hoses to pumps and washer nozzles or as separating points.

- Disconnect by pulling apart both halves of coupling.






- Reconnect by pushing both halves of coupling together until felt and heard to engage.

- Disconnect by turning lock ring - 1 - through 90° - arrow - and then pulling apart both halves of coupling.






- Reconnect by pushing both halves of coupling together and rotating locking ring - 1 - - arrow - until it engages.

- Disconnect by lifting lock ring - 1 - approximately 1 mm - arrow - and then pulling apart both halves of coupling.






- To secure connection, connect hose connection and press in securing ring - 1 - until it engages.

- To secure connection, connect hose connection and press in securing ring - 1 - until it engages.

- Disconnect by raising clip - 1 - - arrow - and then separating coupling from jet.






- To secure connection, connect hose connection and press in securing ring - 1 - until it engages.