Access/Start Authorization Antenna In Rear Bumper (R136)

Access/Start Authorization Antenna In Rear Bumper (R136)

Access/start authorization antenna in rear bumper is located behind bumper cover at rear.

• No coding, basic setting or adaptation is necessary if Access/Start Authorization Antenna in rear bumper is replaced. Erase the entry in the DTC memory using the Vehicle diagnostic tester.

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the rear bumper cover.

- Disconnect the connector - arrow -.






- Remove the access/start authorization antenna in rear bumper (R136) - 1 - from the mount.

Installing

Install in reverse order of removal.