Center Armrest without a Storage Compartment and a Pass-Through

Center Armrest without a Storage Compartment and a Pass-Through

Removing

- Remove the backrest cover and cushion 2 /3. Refer to => [ 2/3-Backrest Cover and Cushion ] 2/3-Backrest Cover and Cushion.

- Remove the cover - 1 - from the center armrest - 2 -.






- Remove the screws - 4 - (8 Nm).

- Remove the center armrest - 1 - from the backrest frame - 2 - in - direction of arrow -.

• The cushion insert - 3 - is permanently glued to the backrest frame - 2 -. Refer to the parts catalog.






- Remove the cap - 5 - from the bracket - 1 -.

- Remove the bolts - 4 - (8 Nm) on both sides of the center armrest - 2 -.

- Remove the center armrest - 2 - and bracket - 1 -.






• Make sure the insert - 3 - is attached to both sides of the center armrest - 2 - before installing.

Installation

- Install in reverse order of removal.

• Check all the fasteners for damage and replace if necessary.