Diagram 15/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fresh air blower control module, Climatronic control module, Vehicle electrical system control module, A/C compressor regulator valve, Fresh air blower





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J126 - Fresh air blower control module Locations

J255 - Climatronic control module Locations

J519 - Vehicle electrical system control module Locations

J533 - Data bus on board diagnostic interface Locations

N280 - A/C compressor regulator valve

T2m - Double connector

T4t - 4-pin connector

T6t - 6-pin connector Locations

T10a - 10-pin connector

T16e - 16-pin connector

T20 - 20-pin connector Locations

T20c - 20-pin connector

T52c - 52-pin connector

V2 - Fresh air blower

(132) - Ground connection 3 (in engine compartment wiring harness)

(376) - Ground connection 11 (in main wiring harness)

(639) - Ground connection on left A-pillar Locations

(655) - Ground connection on left headlamp Locations

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

Previous Diagram 15/6 (Tracks 57-70)