Daytime Running Lamp: Service and Repair

Daytime Running Lamp Bulb

• It is not necessary to remove the headlamp when replacing the headlamp bulb.

• The illustration of the cap shows the right headlamp glass.

• The illustrations show how to replace the left daytime running lamp bulb (L174).

• Replacing a bulb in the right headlamp is identical.

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the bolt - arrow - and then remove the flap - 1 - from the wheel housing liner.






- Turn the cap - 1 - to the left and remove it.






- Turn the bulb socket - 1 - in - direction of arrow - and remove from the headlamp together with the left daytime running lamp bulb (L174).






- Remove the left daytime running lamp bulb (L174) - 2 - from the bulb socket - 1 - in - direction of arrow -.






Bulbs: 12 V/21 W

Installing

• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

• During installation, ensure proper seating of the cap. It is destroyed by entry of water into headlamp.

Install in reverse order of removal. Note the following:

- Check headlamp for functions.

- Check headlamp adjustment and adjust the headlamps.