Diagram 3/18 (Tracks 225-238)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument cluster control module, Vehicle electrical system control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument cluster control module Locations

J519 - Vehicle electrical system control module Locations

J533 - Data bus on board diagnostic interface Locations

T16l - 16-pin connector, near the lower left A-pillar Locations

T20 - 20-pin connector Locations

T32 - 32-pin connector Locations

T52c - 52-pin connector

(A204) - Instrument cluster CAN bus high connection (in instrument panel wiring harness)

(A205) - Instrument cluster CAN bus low connection (in instrument panel wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(B713) - Diagnostic CAN bus high connection 1 (in main wiring harness)

(B714) - Diagnostic CAN bus low connection 1 (in main wiring harness)

* - Diagnostic connector

Previous Diagram 3/17 (Tracks 211-224)

Next Diagram 3/19 (Tracks 239-252)