Diagram 12/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver side rear side airbag crash sensor, Front passenger side rear side airbag crash sensor, Airbag control module, Driver head curtain airbag igniter, Front passenger head curtain airbag igniter, Battery interrupt igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

B - Starter

G256 - Driver side rear side airbag crash sensor

G257 - Front passenger side rear side airbag crash sensor

J234 - Airbag control module Locations

N251 - Driver head curtain airbag igniter

N252 - Front passenger head curtain airbag igniter

N253 - Battery interrupt igniter

T2eg - Double connector

T2eh - Double connector

T2ei - Double connector

T2ej - Double connector

T2ek - Double connector

T75 - 75-pin connector Locations

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

* - Only in vehicles with 6-cylinder engine

Previous Diagram 12/6 (Tracks 57-70)

Next Diagram 12/8 (Tracks 85-98)