Wheel Mounting

Wheel Mounting

- Coat the wheel centering seat => [ Protecting Wheel Centering Seat Against Corrosion ] Protecting Wheel Centering Seat Against Corrosion.






1. When mounting a wheel, tighten all wheel bolts uniformly by hand.

2. Tighten the wheel bolts diagonally to approximately 30 Nm.

3. Lower the vehicle to the ground and tighten all the wheel bolts diagonally to the tightening specification => [ Wheel Bolt Tightening Specifications ] Specifications.

4. Install wheel center cap if applicable.


Do not use an impact wrench to install the wheel bolts.