Carpet

Carpet

Removing

- Turn off the ignition.

- Remove the lower A pillar trim on the driver side. Refer to => [ Driver Side Lower A-Pillar Trim ] Driver Side Lower A-Pillar Trim.

- Remove A-pillar lower trim on the front passenger side. Refer to => [ Front Passenger Side A-Pillar Lower Trim ] Front Passenger Side A-Pillar Lower Trim.

- Remove the foot rest cover.

- Remove steering column lower trim. Refer to => [ Steering Column Lower Trim ] Steering Column Lower Trim.

- Remove the left and right B-pillar lower trim. Refer to => [ Lower B-Pillar Trim ] Lower B-Pillar Trim.

- Remove the driver and front passenger seats.

- Remove seat bench. Refer to => [ Seat Bench/Single Seat ] Seat Bench/Single Seat

- Remove center console. Refer to => [ Center Console ] Center Console.

- Remove the left and right rear wheel housing trim. Refer to => [ Lower C-Pillar Trim ] Lower C-Pillar Trim.

- Remove the left and right sill panel strips. Refer to => [ Sill Panel Strip ] Sill Panel Strip.

- Remove the accelerator pedal module.

- Loosen the carpet - 1 - all the way around.

- Lift the carpet - 1 - and, with a second technician, remove it from the vehicle - 2 - (folded lengthwise).






Installation

Install in reverse order of removal. Note the following:

- Position the carpet - 1 - inside the vehicle - 2 - (folded lengthwise).

- Unfold the carpet - 1 - inside the vehicle - 2 -.

• Make sure the carpet is installed correctly. The holes and fasteners must line up with each other.

• Check all the fasteners for damage and replace if necessary.

Install in reverse order of removal.