Driver Side Lower A-Pillar Trim

Driver Side Lower A-Pillar Trim

Removing

- Remove the sill panel strip from the body near the lower A-pillar trim. Refer to => [ Sill Panel Strip ] Sill Panel Strip.

- Remove the instrument panel cover on each side. Refer to => [ Instrument Panel ] Instrument Panel.

- Remove the A-pillar center trim. Refer to => [ A-Pillar Gap Cover ] A-Pillar Gap Cover.

- Remove the hood release lever - 3 -.

- Remove clip - 2 -.

- Loosen the A-pillar lower trim on the driver side - 1 - from the body in - direction of arrow A -. Remove the trim from the door seal.






Installation

- Install in reverse order of removal.

• Check all the fasteners for damage and replace if necessary.

• Make sure the trim panel is installed inside the door seal.