Upper C-Pillar Trim

Upper C-Pillar Trim

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Remove the rear wheel housing trim. Refer to => [ Lower C-Pillar Trim ] Lower C-Pillar Trim.

- Loosen the trim - 2 - from the clips - 3 - and - 1 - using trim removal wedge (3409).

- Remove the trim - 2 -.






- Loosen the clips - 4 - and - 5 - and the C-pillar trim - 2 - from the mounts using trim removal wedge (3409).

- Loosen the C-pillar trim - 2 - from the mounts - 1 - and - 3 - in - direction of arrow -. Remove the trim from the door seal molding.






- Remove the C-pillar trim - 1 - upward from the rear shelf - 2 -.






Installation

- Install in reverse order of removal.

• Check all the fasteners for damage and replace if necessary.

• Make sure the trim panel is installed inside the door seal.