Mirror Glass

Mirror Glass

Special tools, testers and auxiliary items required

• Wedges (T10383)

• The following describes removing and installing the right mirror glass. Removing and installing the left mirror glass is identical.

Removing






Wear protective eyewear and gloves when working.

- Protect edge of housing - 2 - from damage to paintwork, for example with fabric-reinforced adhesive tape.

- Press mirror glass - 1 - into mirror housing at top - arrow -.

- Press the mirror glass - 1 - from the mirror adjusting unit using the wedge (T10383) - 4 -.

- Swivel the mirror glass - 1 - to the side - arrow -. Disconnect the connectors - 3 - for the mirror heater from the back of the mirror glass - 1 -.

Installation

- Connect the connectors to the mirror glass.

- Press the center of the mirror glass onto the adjusting unit in the housing.

The mirror glass will engage with a click.

• Perform function test.