Operation CHARM: Car repair manuals for everyone.

Front Door Lamps and Switches







Button Module, Driver Side

Special tools, testers and auxiliary items required

Removal Wedge (3409)

Turn off the ignition and all electrical consumers.

Remove the key.

When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (3409) , screwdriver) will be positioned using commercially available adhesive tape.

The following components are integrated in driver side button module, depending on equipment:

Driver power window button (E710)

Driver side rear power window button in driver door (E712)

Front passenger side rear power window button in driver door (E714)

Front passenger power window button in driver door (E715)

Child Safety Button (E318)

Push Button Illumination (L76)

Removing

- Release the handle trim - 1 - on the front using (3409) - arrows - in - direction of arrow - and remove it from the door trim panel.






- Operate the release - 2 -, disconnect the connector - 1 - and remove the handle trim.






- Open the tabs (right and left) - arrows - and remove the button module - 3 - from the handle trim.

Installing

Install in reverse order of removal.