Diagram 11/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Transverse acceleration sensor, Rotation rate sensor, ESP sensor unit, ABS control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch

G200 - Transverse acceleration sensor

G202 - Rotation rate sensor

G419 - ESP sensor unit

J104 - ABS control module Locations

J623 - Engine control module Locations

N135 - Right rear ABS outlet valve

N136 - Left rear ABS outlet valve

T4al - 4-pin connector

T47 - 47-pin connector Locations

V64 - ABS hydraulic pump

(43) - Ground connection on A-pillar, lower right Locations

(366) - Ground connection 1 (in main wiring harness)

(388) - Ground connection 23 (in main wiring harness)

(638) - Ground connection on right A-pillar Locations

(A199) - Positive connection 4 (15a) (in instrument panel wiring harness)

(B131) - Connection (54) (in interior wiring harness)

* - Refer to applicable engine wiring diagram

Previous Diagram 11/3 (Tracks 15-28)

Next Diagram 11/5 (Tracks 43-56)