Diagram 2/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Sunroof adjustment regulator, Sunroof tilt button 1, Power sunroof control module, Vehicle electrical system control module, Sunroof motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E1 - Light switch

E139 - Sunroof adjustment regulator Sunroof Adjustment Regulator -E139- and Sunroof Tilt Button 1 -E582-

E582 - Sunroof tilt button 1 Sunroof Adjustment Regulator -E139- and Sunroof Tilt Button 1 -E582-

J245 - Power sunroof control module Locations Power Sunroof Control Module -J245- and Sunroof Motor -V1-

J519 - Vehicle electrical system control module Locations

J533 - Data bus on board diagnostic interface Locations

T3uh - 3-pin connector

T4ad - 4-pin connector

T10h - 10-pin connector

T16s - 16-pin connector

T20 - 20-pin connector Locations

T52b - 52-pin connector

V1 - Sunroof motor Locations Power Sunroof Control Module -J245- and Sunroof Motor -V1-

Y - Analog clock

(639) - Ground connection on left A-pillar Locations

(B151) - Positive connection 3 (30a) (in interior wiring harness)

(B340) - Connection 1 (58d) (in main wiring harness)

(B528) - LIN bus connection 1 (in main wiring harness)

Previous Diagram 2/16 (Tracks 197-210)

Next Diagram 2/18 (Tracks 225-238)