Diagram 25/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Multifunction indicator, Instrument cluster control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J119 - Multifunction indicator

J285 - Instrument cluster control module Locations

J533 - Data bus on board diagnostic interface Locations

T16 - 16-pin connector

T20 - 20-pin connector Locations

T32 - 32-pin connector Locations

(A204) - Instrument cluster CAN bus high connection (in instrument panel wiring harness)

(A205) - Instrument cluster CAN bus low connection (in instrument panel wiring harness)

(B713) - Diagnostic CAN bus high connection 1 (in main wiring harness)

(B714) - Diagnostic CAN bus low connection 1 (in main wiring harness)

* - Diagnostic connector

Previous Diagram 25/3 (Tracks 15-28)