Shift Lever and Housing Overview

Shift Lever and Housing Overview

• Lubricate the bearing areas and the sliding surfaces. Grease allocation, refer to the Parts Catalog.

• Shift mechanism disassembly and assembly. Refer to => [ Shift Mechanism ] Shift Mechanism.






1 Base Plate

• Bend the tabs down in order to remove.

• Always replace.

2 Gasket

• Always replace.

3 Shift Lever

• Can be removed and installed with the shift lever guide (- item 15 - installed.

4 Washer

• Slide onto the shift lever as far as the stop - arrow -.

5 Lock Washer

• Be careful not to damage the cables when removing them.

• Always replace.

6 Selector Cable

• Pry off of the selector bracket.

• Press onto the selector bracket inside the shift mechanism.

• Installed position, refer to => [ Shift and Selector Cables, Installed Position ] Shift and Selector Cables, Installed Position.

7 Bushing

8 Shift Cable

• Pry off of the shift lever guide.

• Press onto the shift lever guide inside the shift mechanism.

• Installed position, refer to => [ Shift and Selector Cables, Installed Position ] Shift and Selector Cables, Installed Position.

9 Sound Insulation

10 Bearing Shell

• Will get damaged when being removed.

• Always replace.

11 Bushing

12 Lock Washer

• Removing and installing, refer to => [ Lock Washer, Removing and Installing ].

13 Pressure Spring

• Removing and installing, refer to => [ Lock Washer, Removing and Installing ].

14 Bushing

15 Shift Lever Guide

16 Nut

• 8 Nm

• Quantity: 4

17 Gasket

• Between the shift housing and the underbody.

• With self-adhesive.

• Affix to the shift housing.

18 Shift Housing

• With the spring and selector bracket.

• Spring and selector bracket cannot be removed.

Lock Washer, Removing and Installing





- Hold the shift lever - 2 - tight.

- Press the bushing - 3 - down in the - direction of the arrow -.

- Remove the lock washer - 1 -.