Controls, Housing

Special Tools

Special tools, testers and auxiliary items required

• Puller (T10408)

• Thrust Piece (T10408/2)

• Plate (T10408/3)

• Adapter (VW 295 A)

• Thrust Pad (VW 447 H)

• Thrust Pad (VW 512)

• Thrust Tube (VW 454)

• Press Tube (2040)

• Adapter (10-222 A/28)

• Adapter (10-222 A /28-2)

• Connecting Pin (T10027 A)






• Hose Clamp Pliers (V.A.G 1275)






• Seal Installer Set - Rear Diff (3066)






• Pin (3282/29)






• Adjustment Plate (3282/39)






• Thrust Piece (T10148)






• Transmission Support Jig (3336)






• Shop Crane - Load Cap = 700-1200 KG (VAS 6100)






• Thrust Block (T10083)






• - 2 - Kukko Puller 65-160 mm (18/1)






• Inductive Heat Unit (VAS 6414)






• Slide Hammer-Complete Set (VW 771)






• Additional Part for VW 771 (VW 771/37)






• Thrust Piece (T10203)






• Sleeve (VW 423)






• Assembly Mandrel (10-508)






• Spring Strut Compressor (2070)






• Trim Removal Wedge (3409)











Special tools, testers and auxiliary items required

• Engine Support Bridge (10-222 A)

• Transmission Support (3282)

• Engine-/Gearbox Jack (V.A.G 1383 A)

• Tensioning Strap (T10038)

• Engine Support Basic Set (T40091)

• Engine Support Supplement Set (T40093)






Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Transmission Support (VW 353)

• Needle Bearing Drift (VW 295)

• Driving Sleeve (VW 244 B)

• Inductive Heat Unit (V.A.G 1416)

• Torque Wrench (5-50 Nm) (V.A.G 1331)






Special tools, testers and auxiliary items required

• Bracket (30-211 A)

• Driving Sleeve (32-111)

• Thrust Piece (T10030/4) from Assembly Tool (T10030)

• Tube 37 mm Dia. (VW 416 B)

• Puller (T10309)

• Two Arm Puller (T10040)

• Puller Legs with Thrust Piece (T10040/2A+/3)






Special tools, testers and auxiliary items required

• Support Bridge (T10323)

• Subframe Support Assembling Device (3253/7)

• Thrust Pad Con. 8/65 (VW 433)

• Torque Wrench (40-200 Nm) (V.A.G 1332)






Special tools, testers and auxiliary items required

• Thrust Plate (VW 402)

• Subframe Support Assm. Device (3290)

• Thrust Pad 16.5/28 mm Dia. (VW 431)

• Assembly Tool (3301)

• Spacer (VW 472/2)

• Drift (10-206)






Special tools, testers and auxiliary items required

• Release Tool (T10236)

• Thrust Disc (VW 412)

• Assembly Tool (T10178)

• Adapter (10-222 A/25)

• Counter Support, for example, from Kukko Series 16 (Quantity: 2)

• Wedge (T10357)