Rear Door Lamps and Switches

Rear Window Regulator Button (E711)/(E713)

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (3409) , screwdriver) will be positioned using commercially available adhesive tape.

The following components are integrated inside the driver side rear power window button (E711) and front passenger side rear power window button (E713).

• Push button illumination bulb (L76) (cannot be replaced separately)

• Removing and installing the driver side rear power window button/front passenger side rear power window button are identical.

Removing

- Release the handle trim - 1 - on the front using (3409) - arrows - in - direction of arrow - and remove it from the door trim panel.






- Disconnect the connector - 2 -.






- Release the four tabs - arrows - and remove the rear window regulator button from the handle trim - 1 -.

Installing

Install in reverse order of removal.

- Make sure the four tabs click into place when installing.