Rear Bumper Assembly Overview

Rear Bumper Assembly Overview

• Depending on model version, there are minor differences in the rear bumper covers.






1 Rear bumper cover

• PP/EPDM material

• Removing and Installing, refer to => [ Rear Bumper ] Rear Bumper

2 Bolt

• 1 on each side

• Tightening specification: 2 +/- 0.2 Nm

3 Expanding rivet

• Quantity: 3

4 Bolt

• Quantity: 3

• Tightening specification: 2 +/- 0.2 Nm

5 Bolt

• Left and right

• Pointing upward

• Tightening specification: 2 +/- 0.2 Nm

6 Bolt

• 2 on each side

• Tightening specification: 2 +/- 0.2 Nm