Cap without Lock Cylinder

Cap without Lock Cylinder

Special tools, testers and auxiliary items required

• Assembly tool (T10389)

Removing






- Pry the cap - 3 - out of the opening.

- Guide the assembly tool (T10389) through the opening - 3 - behind the locking hook - 2 -.

- Pull the assembly tool (T10389) toward the rear - arrow - until the hook is released.

- Remove the door handle - 2 - from the door in - direction of arrow a -.






- Remove the housing - 1 - from the bracket at a right angle - arrow b -.

Installation

- Remove the door handle - 2 - from the door in - direction of arrow a -.






- Install the housing - 1 - into the bracket - arrow b - at a right angle.






- Insert a screwdriver - 4 - through the opening - 5 - onto the locking hook - 3 -.

- Install the housing - 1 - on the door.

- Push the screwdriver - 4 - in - arrow - until the hook catches. Release the door handle - 2 -.

- Install the cap.