Fuel Filler Door Unit Assembly Overview

Fuel Filler Door Unit Assembly Overview






1 Fuel filler door unit

• Removing and Installing, refer to => [ Fuel Filler Door Unit ] Fuel Filler Door Unit

2 Bolt

• Tightening specification: 1.5 Nm

3 Fuel tank lid unlock motor (V155)

• Actuator, Removing and Installing, refer to => [ Actuator ] Actuator

4 Connector

• For the fuel tank lid unlock motor (V155)

5 Grommet

6 Water drain hose

• Routed between the wheel housing and the wheel housing liner