Insulation

Insulation

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)

Removing






Perform the following:

- Support the hood - 1 - and remove the support rod from the hood.

- Pry the 14 clips - 3 - out of the hood - 1 - in - direction of arrow - using pry lever (80 - 200).

- Remove the noise insulation - 2 - from the oblong holes in the hood - 1 -.

Installation






Perform the following:

• When installing the noise insulation - 2 -, be sure to install the retaining clips - 3 - with the wide side facing out.

- Install the noise insulation- 2 - into the oblong holes in the hood - 1 -.

- Install all 14 clips - 3 - into the hood - 1 -.